A basic condition for high hectare yields is even manure spreading on surface unit. Good spreading is carried out by a modernized horizontal spreading device with spades or saws. The functioning is improved by moving of conveyor forwards and backwards, regulated from driver's seat. Reducer cogwheels of transmission system are plunged in oil. When the spreading unit is removed and sideboard board extensions are added, the spreader can be used for transport of silage.

/Chassis/
Stable framework profile 240 x 80 x 5 mm, high drawbar hitch with ring towing eye (screwed), mechanic jack stand

/Axle/
RINNER-tandem brake axle with 6-stud rims, brake cam dimensions 300 x 80 mm, parabolic suspension, axle load 5000 kg/axle at 40 km/h, wheel base 1140 mm, track 1650 mm

/Brakes/
Dual-line airbrake system on all four wheels, separate parking brake, airbrake installation, brake load 5000 kg/axle at 40 km/h

/Body-work/
Framework-profile 199 x 114 / 60 x 4 mm, steel sideboards 500 mm and steel extension boards 500 mm (original FUHRMANN), collapsible boards opening, several times glued wooden floor 35 mm thick, plug-in view grill (perforated sheet) front, mudguards

/Drive/
Wide-angle PTO drive shaft WALTERSCHEID over continuous drive shaft to shaft with overload clutch 1500 Nm, operating at 540 rpm

/Base/
Hydraulic drive, with continuously variable forward and backward motion, is provided by a chain drive and oil motor, the speed of the floor conveyor is adjustable from the tractor (operator’s console), automatic chain tension

/Spreading unit/
4 vertical mill rollers (beaters) with screwed HARDOX sawtooth cutters, spreading width up to 8 m, spreader rollers are driven individually by 4 mitre gears in an oil bath, a cardan shaft is used between drive shaft and gearbox, removable spreading unit, hydraulic rear flap door²⁾

Max. permissible weight
Dead weight
Permitted load
Overall dimensions (length x width x height)
Internal body dimensions (length x width)
Sidewalls height
Platform height (with standard tyres)
Load volume / Usable volume
Track
Axle diameter
Drawbar eye
Drawbar load
Maximum speed
Tyres
Braking

Passage width x Passage height
4 Chains, 12 to breaking load per chain
Feed shaft
Lighting
Power requirements kW / HP

> Tyres 500/50-17 14 PR ET-35
> Tyres 500/45-22.5 ET-25
> Tyres 500/55-20 12 PR ET-35
> Hydraulically operated rear door with 3. extensions
> Rear extension board 500 mm
> Rear board 500 mm
> Wide-angle PTO drive shaft with cam-type cut-out clutch 1500 Nm
> Hydraulic rear flap door¹⁾ (at 25/40 km/h)
> Solenoid valve for hydraulic brake
> Dual-line airbrake system¹⁾
> Brake installation with ALB (automatic load-dependent brake force control)
> 40 km/h performance without ALB and valve
> Hydraulic slurry door (only initial equipment)
> Hydraulic jack stand
> Electrical control of floor conveyor drive, adjustable from the tractor

SUPERFEX 1200T - Max. permissible weight 12000 kg
with Tyres 500/50-17 and brake axles with 8-stud rims

1) CH-version; registration AT-version, 25/40 km/h
2) DE-version 25/40 km/h