FARMTECH

> Manure spreader SUPERFEX 700

DLG-Test

A basic condition for high hectare yields is even manure spreading on surface unit. Good spreading is carried out by a modernized horizontal spreading device with spades or saws. The functioning is improved by moving of conveyor forwards and backwards, regulated from driver's seat. Reducer cogwheels of transmission system are plunged in oil. When the spreading unit is removed and sideboard board extensions are added, the spreader can be used for transport of silage.

/Chassis/
Trapezoidal V-frame made of C-pressed sections frame 5 mm, high drawbar hitch¹⁾ resp. overrun hitch²⁾ with ring towing eye (screwed), mechanic jack stand or adjust. support wheel

/Axle/
FAD-brake axle with 6-stud rims, brake cam dimensions 300 x 60 mm²⁾ or RINNER-brake axle with 6-stud rims, brake cam dimensions 300 x 80 mm¹⁾, axle load 6500 kg/axle

/Brakes/
Mechanical hand brake¹⁾ or overrunning brake with moving automatism²⁾, two-wheel braked, brake load 80001) kg/axle or 60002) kg/axle

/Body-work/
Framework-profile 199 x 114 / 60 x 4 mm, steel sideboards 500 mm (original FUHRMANN), collapsible boards opening, several times glued wooden floor 35 mm thick, plug-in view grill (perforated sheet) front

/Drive/
Wide-angle PTO drive shaft WALTERSCHEID over continuous drive shaft to shaft with overload clutch 1500 Nm, operating at 540 rpm

/Base/
Hydraulic drive, with continuously variable forward and backward motion, is provided by a chain drive and oil motor, the speed of the floor conveyor is adjustable from the tractor (operator’s console), automatic chain tension

/Spreading unit/
4 vertical mill rollers (beaters) with screwed HARDOX sawtooth cutters, spreading width up to 8 m, spreader rollers are driven individually by 4 mitre gears in an oil bath, a cardan shaft is used between drive shaft and gearbox, removable spreading unit, hydraulic rear flap door²⁾

TECHNICAL SPECIFICATIONS

SUPERFEX 700

Max. permissible weight
Dead weight
Permitted load
Overall dimensions (length x width x height)
Internal body dimensions (length x width)
Sidewalls height
Platform height (with standard tyres)
Load volume / Usable volume
Track
Axle diameter
Drawbar eye
Drawbar load
Maximum speed
Tyres
Braking

Passage width x Passage height
2 Chains, 8 to breaking load per chain
Feed shaft
Lighting
Power requirements kW / HP

7000 kg
1900 kg
5100 kg
6000 x 2075 x 2680 mm
4200 x 1800 mm
500 mm
1120 mm
3,78 m³ / 8,80 m³
1600 mm
70 mm
ø 40 mm
1600 kg
25 km/h / 15.5 mph
15.0/55-17 12 PR (380/55-17)
Mechanical hand brake¹⁾
Overrunning brake, two-wheel braked²⁾
1800 x 1100 mm
10 x 31 mm
ø 40 mm
Commercial road lighting system (12 V)
41 kW / 56 HP >

OPTIONAL EQUIPMENT

> Tyres 19.0/45-17 10 PR (480/45-17) > Tyres 19.0/45-17 14 PR (480/45-17) > Tyres 19.0/45-17 Flotation+ > Tyres 500/50-17 14 PR > Support 80 mm for Tyres 500/50-17 14 PR > Hydraulically operated rear door with 3. extensions > Side extension boards 500 mm > Rear extension board 500 mm > Rear board 500 mm > Hydraulic rear flap door¹⁾ > Wide-angle PTO drive shaft with cam-type cut-out clutch 1500 Nm > Hydraulic brake > Solenoid valve for hydraulic brake > Dual-line airbrake system > Brake installation with ALB (automatic load-dependent brake force control) > Hydraulic slurry door (only initial equipment) > Axle with track 1800 mm (before assembly) > Electrical control of floor conveyor drive, adjustable from the tractor

1) Registration AT-version 25 km/h; CH-version with hydraulic brake
2) DE-version 25 km/h