FARMTECH

> Manure spreader SUPERFEX 800T

DLG-Test

A basic condition for high hectare yields is even manure spreading on surface unit. Good spreading is carried out by a modernized horizontal spreading device with spades or saws. The functioning is improved by moving of conveyor forwards and backwards, regulated from driver's seat. Reducer cogwheels of transmission system are plunged in oil. When the spreading unit is removed and sideboard board extensions are added, the spreader can be used for transport of silage.

/Chassis/
Stable framework profile 240 x 80 x 5 mm, high drawbar overrun hitch with ring towing eye (screwed), mechanic jack stand

/Axle/
FAD-tandem brake axle with 6-stud rims, brake cam dimensions 300 x 60 mm, parabolic suspension, axle load 5000 kg/axle, wheel base 1140 mm, track 1650 mm

/Brakes/
Overrunning brake with moving automatism, four-wheel braked, brake load 6000 kg/axle

/Body-work/
Framework-profile 199 x 114 / 60 x 4 mm, steel sideboards 500 mm and steel extension boards 500 mm (original FUHRMANN), collapsible boards opening, several times glued wooden floor 35 mm thick, plug-in view grill (perforated sheet) front

/Drive/
Wide-angle PTO drive shaft WALTERSCHEID over continuous drive shaft to shaft with overload clutch 1500 Nm, operating at 540 rpm

/Base/
Hydraulic drive, with continuously variable forward and backward motion, is provided by a chain drive and oil motor, the speed of the floor conveyor is adjustable from the tractor (operator’s console), automatic chain tension

/Spreading unit/
4 vertical mill rollers (beaters) with screwed HARDOX sawtooth cutters, spreading width up to 8 m, spreader rollers are driven individually by 4 mitre gears in an oil bath, a cardan shaft is used between drive shaft and gearbox, removable spreading unit, hydraulic rear flap door¹⁾

TECHNICAL SPECIFICATIONS	SUPERFEX 800T

Max. permissible weight Dead weight Permitted load Overall dimensions (length x width x height) Internal body dimensions (length x width) Sidewalls height Platform height (with standard tyres) Load volume / Usable volume Track Axle diameter Drawbar eye Drawbar load Maximum speed Tyres Braking Passage width x Passage height 4 Chains, 12 to breaking load per chain Feed shaft Lighting Power requirements kW / HP	8000 kg 2600 kg 5400 kg 7000 x 2100 x 2600 mm 5000 x 1800 mm 500+500 mm 1180 mm 9,00 m³ / 10,50 m³ 1650 mm 70 mm ø 40 mm 1250 kg 25 km/h / 15.5 mph 15.0/55-17 12 PR (380/55-17) Overrunning brake, four-wheel braked 1800 x 1100 mm 10 x 31 mm ø 40 mm Commercial road lighting system (12 V) 47 kW / 64 HP >

OPTIONAL EQUIPMENT

> Tyres 19.0/45-17 14 PR (480/45-17) > Tyres 500/50-17 14 PR ET-35 > Tyres 500/45-22.5 ET-25 > Tyres 500/55-20 12 PR ET-35 > Rear extension board 500 mm > Rear board 500 mm > Wide-angle PTO drive shaft with cam-type cut-out clutch 1500 Nm > Universal spreading unit with 2 horizontal beaters and 2 sturdy plates > Electro-magnetic control system at universal spreading unit for controlling rear flap door, hydraulic slurry door* and hydraulic jack stand* > 40 km/h performance > Hydraulic slurry door (only initial equipment)* > Hydraulic jack stand* > Electrical control of floor conveyor drive, adjustable from the tractor

1) DE-version 25/40 km/h with overrunning brake